BSI-2A Biphasic Stimulus Isolator,Dual Channel Constant Current Isolator Details:
The BSI-2A dual-phase stimulation isolator is specifically designed for applications requiring precise control of rectangular wave stimulation, and is engineered to work in conjunction with an external timing circuit. The external timing input can separately control two optically isolated, independently powered constant current sources. Due to the fact that each output is equipped with a completely independent isolator, range control, and output circuit, the "A" and "B" outputs can act as mutually independent single-phase stimulation signals, isolated from each other and from the control input. Each output terminal is equipped with a reverse switch and additional terminals for convenient installation of coupling capacitors or current monitoring resistors. The layout of the two sets of output terminals is reasonable, and by simply adding two jumpers (included), the equipment can be switched to dual-phase or pulse pair operation mode immediately.

The BSI-2A model features high compliance, high isolation performance, and uses the same portable plastic casing as the BSI-1A. The main difference is that its output circuit has been optimized for switch-mode gated operation rather than proportional input following. This working mode itself has extremely low noise and can avoid the generation of direct current due to small offsets in the control signals between output pulses. Additionally, this device allows users to manually adjust the output level, facilitating placement near the preparation location. If you require non-rectangular waveforms (such as sine waves, ramps, or computer D/A drive signals), we recommend using the BSI-1A linear dual-phase stimulation isolator, which provides a complete range of constant current and constant voltage output levels.
BSI-2A - Biphasic Stimulus Isolator
| Item |
Specification |
| Output Type |
Two optically-isolated constant-current channels |
| Current Range |
100 nA ~ 10 mA per channel |
| Amplitude Control |
10-turn potentiometer with dial, 5-position rotary range switch |
| Output Linearity |
≤1 % full range |
| Compliance Voltage |
90 V per channel (battery powered) |
| Isolation Rating |
1000 VDC optical isolation; <30 pF inter-channel capacitance |
| Trigger Input |
Floating BNC, TTL-compatible, min ±2.8 V gate signal |
| Output Connectors |
3way banana binding posts (3 posts per channel) |
| Operation Modes |
Dual independent monophasic / biphasic / pulse-pair (jumpers included) |
| Operation |
Gated on-off mode (optimized for rectangular pulses) |
SAG: BSI‑2A,BSI2A, Biphasic Stimulus Isolator,constant current stimulator,optical stimulus isolator,neuroscience stimulator,electrophysiology isolator,BSI-2A Biphasic Electrical Stimulator,BSI-2A Electrical Stimulator,Biphasic Electrical Stimulator