COF-2000 Friction Coefficient Tester,COF Test Machine with EZ Data Software

Mode:COF-2000

Type:QA-Instruments

Contact:   ken@hkmedqc.com

The COF-2000 friction coefficient tester is easy to set up and use, and provides automatic calculation results after each test. The friction coefficient tester meets or exceeds various testing methods, including ASTM D1894. It has a sturdy structure that can withstand abuse in production environments. It features advanced digital speed control using a stepper motor. The optional speed ranges from 1 to 24 images per minute (3 to 60 images per minute) in even increments. The static and dynamic COF results are displayed immediately after the test. The machine comes with a 5-pound weighing sensor.

COF-2000 Friction Coefficient Tester,COF Test Machine with EZ Data Software
 


COF-2000 Friction Coefficient Tester Features:  

Robust construction designed to withstand the rigors of production environments  

Advanced digital speed control using stepper motor  

Selectable speeds from 1–24 images per minute (3–60 images per minute), in even increments  

Static and dynamic COF results displayed immediately after testing  

Comes with a 5-pound load cell  

Test samples as short as 1/2" up to 6" (12–150 mm)  

Includes a 2.5-inch (6 cm) square, rubber-coated, 200-gram sled  

Custom sleds available, weighing up to 2000 grams  

Quick and easy setup and operation for reliable results  

Capable of independent operation with integrated digital display  

Data can be downloaded to EZ Data software for complete data management  

Capable of pulling weights up to 10 pounds (4.5 kg)  

Operating temperature range: 32°–150°F (0°–70°C)  

Universal input voltage range: 85–265 VAC (50/60 Hz)

 

COF-2000 Friction Coefficient Tester Data Acquisition System  

The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor-controlled force measurement software package, combining accuracy and ease of use. The system controls test motion, reads test forces from the load cell, displays them digitally, and stores data in memory.  

At a frequency of 400 Hz, it collects and averages eight samples, storing them as one data point. A data point is generated every 20 milliseconds.  

A graph of all measured force values is displayed upon completion of the test  

Average, high, and low measured force results are shown immediately after testing  

Export data to a local PC via USB connection using our EZ Data software  

Test values displayed in grams, kilograms, ounces, pounds, or newtons  

 

Remote setup, operation control, and enhanced data collection are possible when used with our EZ Data management software. This application requires an external PC

COF-2000 Friction Coefficient Tester,COF Test Machine with EZ Data Software

COF-2000 Friction Coefficient Tester,COF Test Machine with EZ Data Software
 



 SAG: Friction coefficient tester,COF-2000,COF-2000 friction coefficient tester,friction coefficient test,COF-2000 friction force tester,friction force tester,paper surface COF tester,EZ Data software tester