SPL HF-400 Electrosurgical Analyzer,High Frequency Unit Tester

Mode:HF-400

Type:QA-Instruments

Contact:   ken@hkmedqc.com

SPL HF-400 Electrosurgical Analyzer,High Frequency Unit Tester.PDF

HF-400 High Frequency Electric Knife Tester, SPL HF-400 Electric Knife Tester is an electrosurgical analyzer used for functional testing of high-frequency surgical equipment

SPL HF-400 Electrosurgical Analyzer,High Frequency Unit Tester

Menu-guided cursor operation or PC operation

HF - Power Measurement
HF - Voltage Measurement
HF - Current Measurement
HF - Leakage Current Measurement
Test load resistance: 10 ohms, 25 - 6375 ohms, with a step size of 25 ohms
6 optional pre-resistors
User-specific language settings

HF-400 High Frequency Electric Knife Tester. The SPL HF-400 electric knife tester is used to test the functions of surgical equipment with HF. According to the instructions of such manufacturers, users can measure the HF output power and HF leakage current on the given load resistance. The load resistance can be adjusted to 10 ohms, ranging from 25 to 6375 ohms with a step size of 25 ohms. The test parameters can be listed in the test instructions to specify what to test and can be automatically tested via a PC. This can reduce the testing time. When used as a multi-functional tester, the measurement values will be directly displayed, such as:
High frequency output power
High frequency leakage current
HF current, RMS
HF voltage, RMS

High-frequency output power: During the power measurement process, the software first sets the specified load resistance to 10 ohms or 25 ohms, ranging from 25 ohms to 6375 ohms in steps of 25 ohms. The HF's output power can be sent to HF-400 for measurement. An automatic range switcher is responsible for the optimal control of the RMS converter. This RMS converter, based on the thermal conversion principle and in coordination with the driver module, is specifically designed to reach 10 MHz.
 

High-frequency leakage current:

The high-frequency leakage current is measured through a 200 ohm load resistor. For this test, the load resistor is adjustable.
 

Main features

Full-function ESU tester compliant with IEC 60601-2-2 safety standard
Test items: High-frequency power, high-frequency RMS voltage/current, high-frequency leakage current, peak factor, neutral electrode test
Adjustable electronic load resistance: 10 ohms, 25–6375 ohms, with a step size of 25 ohms; 6 selectable preset resistance values
Measurement range: High-frequency power 0–500 watts; High-frequency leakage current 0–250 milliamps; High-frequency current 0–5000 milliamps
Accuracy: Power ±1 watt or ±2.5% of reading; Leakage current ±2 milliamps or ±5% of reading
Dual operation modes: Local menu-driven independent operation or automatic control via PC
Interfaces: USB and RS-232 for PC data recording, report generation, and automated test sequence
4×20 LCD display; supports multilingual menu
Portable rugged desktop design, equipped with an integrated handle for on-site service

 



 SAG: HF‑400,SPL HF400,Electrosurgical Analyzer,ESU tester,high frequency surgical unit tester,HF power analyzer,electrosurgery leakage current test,biomedical test equipment,surgical generator performance tester