JSR DPR500 Dual Pulser‑Receiver,Modular Ultrasonic Pulse Receiver

Mode:JSR-DPR500

Type:QA-Instruments

Contact:   ken@hkmedqc.com

JSR DPR500 Dual Pulser‑Receiver,Modular Ultrasonic Pulse Receiver.PDF

The JSR DPR500 is a computer-controlled modular high-performance ultrasonic pulse emission and reception device, supporting single-channel and dual-channel configurations. It is equipped with replaceable remote pulse heads, and the pulse excitation unit can be installed nearby the ultrasonic probe, significantly reducing signal reflection and ringing interference caused by cables. Three receiving bandwidth modules with 50 MHz, 300 MHz, and 500 MHz are available, supporting pulse echo and penetration transmission working modes. It is mainly used in high-frequency ultrasonic experiments, ultrasonic transducer evaluation, film coating thickness measurement, acoustic microscope, and material research scenarios.

JSR DPR500 Dual Pulser‑Receiver,Modular Ultrasonic Pulse Receiver

Core technical parameters

▪ Channel Configuration: Single channel / Dual channel options available. Dual channels can freely mix and match different bandwidth modules.
▪ Reception Bandwidth Modules: 0.01 - 50 MHz / 5 - 300 MHz / 5 - 500 MHz
▪ Gain Range: -22 to 50 dB / -13 to 66 dB, with 1 dB step adjustment, maximum low-noise gain 72 - 80 dB
▪ Filtering: Built-in multi-step adjustable high-pass and low-pass filters
▪ Working Modes: Pulse-Echo mode (Pulse-Echo), Through-Transmission mode (Through-Transmission)
▪ Remote Pulse Head: Replaceable RP-L2 / RP-H2 / RP-H4 / RP-U2 / RP-U4 / RP-U5 remote pulse generators, suppressing cable signal distortion
▪ Adjustable Parameters: Damping, pulse energy, pulse amplitude, pulse repetition frequency (PRF)
▪ Trigger: Internal trigger, external trigger input, synchronous output to oscilloscope, high-speed acquisition card
▪ Communication Interface: RS-232 serial port, supports multi-device daisy-chain cascading
▪ Software: Windows-based upper-level control panel software, SDK development package, LabVIEW VI, C language driver, facilitating automation integration
▪ Signal Output: 50Ω BNC receiving output
▪ Power Supply: 100 - 240V wide voltage AC input
 

Optional Accessories (Remote Pulse Head, Cable)

 

1. Remote Pulse Head (Remote Pulser) (Standard equipment for the host, not included. Requires separate selection and purchase)

Model  Pulse Amplitude Max Pulse Energy Recommended Transducer Frequency Main Feature
RP-L2 -155 V 316.2 μJ 1-65 MHz Low-frequency, high-energy; for low-freq thick-sample test
RP-H2 -185 V 11.7 μJ 40-165 MHz Mid-high frequency, general-purpose lab use
RP-H4 -170 V 10.6 μJ 40-165 MHz Mid-high frequency, higher PRF up to 50 kHz
RP-U2 -230 V 8.0 μJ 100-250 MHz Ultra-high frequency, fast fall-time 1.1 ns
RP-U4 -220 V 8.0 μJ 100-250 MHz Ultra-high frequency, max PRF 50 kHz, acoustic microscopy
RP-U5 -40 V 2.5 μJ 100-300 MHz Low-voltage high-frequency application

Each remote pulse head must be paired with a working cable for connection to the DPR500 host.
 

2. Supplementary connection cables (host and remote pulse head connection cables, extension cables)

Working cable series CBL-200 (standard connection cable between host and remote pulse head)
CBL-200 (0.75 meters), CBL-201 (0.60 meters), CBL-205 (1.00 meters), CBL-202 (1.83 meters), CBL-203 (3.05 meters), CBL-204 (3.35 meters)
 
Extension cable series CBL-250 (for extending the distance between the host and the pulse head over a long distance)
CBL-254 (0.60 meters), CBL-251 (3.0 meters), CBL-250 (4.0 meters), CBL-253 (5.0 meters)

Product Highlights

✔ Modular and flexible architecture, with options for single or dual channels, and dual channels that can be mixed with modules of different bandwidths
✔ Remote pulse head technology: The pulse generator is close to the probe, eliminating long cable reflections, ringing, and signal distortion
✔ Multiple replaceable remote pulse heads, covering different probe frequencies and pulse energy requirements
✔ Pulse echo + transmission dual mode, suitable for various ultrasonic experimental schemes
✔ Low-noise high-gain receiving circuit, multiple sets of adjustable filters, optimizing the signal-to-noise ratio of weak echoes
✔ Full PC software control, configuration files can be saved and called; SDK, LabVIEW drivers, facilitating the establishment of an automated testing system
✔ Synchronous trigger output, directly connectable to high-speed acquisition cards, oscilloscopes, and other peripherals


Application scenarios:

-Widely used in non-destructive testing applications, including scanning acoustic microscopes, material analysis and characterization, medical and dental diagnostics, and sensor evaluation.
 

Supply information:

-New original JSR DPR500 pulse emission receiver; bandwidth module (50 MHz / 300 MHz / 500 MHz), single / dual-channel version, customizable.

JSR DPR500 Dual Pulser‑Receiver,Modular Ultrasonic Pulse Receiver




 SAG: SR DPR500,DPR500 pulser‑receiver,ultrasonic pulser receiver,JSR Ultrasonics,remote pulser,RP‑L2,RP‑H2,RP‑H4,RP‑U4,CBL‑200 cable,ultrasonic transducer test,Pulse Emission Receiver,JSR DPR500 Pulse Emission Receiver