MEDA RM100 Nanotesla Meter Benchtop Single-Axis Fluxgate Magnetometer,replacing the old HSM2 model. It serves as a magnetic field measurement benchmark instrument, used for high-precision magnetic field measurement and equipment calibration in laboratories. It employs differential magnetic field cancellation technology to achieve a resolution of 0.1 nT for weak magnetic fields in the geomagnetic environment. The overall accuracy is ±0.01% of the reading. The measurement results are NIST traceable and is suitable for research, metrology, aerospace, and magnetic cleanliness detection scenarios with strict precision requirements.
It has a built-in NULL button for background magnetic field cancellation, supports Min/Max/Avg, peak-to-peak calculation, 8000 sample storage and internal plotting, upper and lower limit audible and visual alarms. It is equipped with RS232 serial port + 10BaseT Ethernet dual communication interfaces, compatible with SCPI commands and LabVIEW drivers, supporting automated program-controlled acquisition; it has multiple voltage output levels, and can be connected to external data acquisition cards.
Main technical parameters
- Measurement range: ±200,000 nT (±200 μT / ±2 Gs)
- Resolution: 0.1 nT (in an environment magnetic field of 100,000 nT)
- Basic accuracy: ±0.01% of reading, traceable to NIST; differential mode ±0.25% ±1 nT
- Temperature stability: offset drift 0.5 ppm/℃
- Measurement axis: single axis
- Data recording: 8,000 sampling points, built-in plotting function
- Interface: RS232, 10Base-T Ethernet, supports SCPI programming
- Analog output: multi-range analog voltage output
- Functions: magnetic field zeroing, minimum/maximum/average value, peak-to-peak, alarm output
- Power supply: AC wall adapter type supply
Application fields
- Calibration and comparison of fluxgate magnetometers and magnetic sensors
- Verification of Helmholtz coils and solenoid systems
- Magnetic cleanliness and dipole moment testing of aerospace and satellite components
- High-level assessment of magnetic shielding effectiveness
- Geomagnetic monitoring, rock magnetism, and detection of material magnetic contamination
Simulated output
The rear panel terminals provide ±10.00 volt DC analog output corresponding to the selected full-scale range, which can be used to record on-site changes near the neutralization level. The front panel control buttons are used to select the analog output bandwidth and the status of the power line suppression filter. The selectable bandwidths include DC to 10 Hz, 50 Hz, 100 Hz, 500 Hz, or 1000 Hz. The standard power line suppression filter frequency is 60 Hz (50 Hz is optional).
Built-in statistical functions
The RM100 has the ability to calculate the average, minimum, maximum, and peak-to-peak values of measured values. This calculation can be carried out continuously during data acquisition or only on the data stored in the RM100 data buffer.
Remote programming and data acquisition
The RM100 can be remotely programmed and data transmitted via the RS232 serial port or 10Base-T Ethernet using SCPI command syntax. The baud rate range is 9,600 to 115,200. The Ethernet connection enables control of the RM100 through a local area network or the Internet.
MEDA RM100 Nanotesla Meter Benchtop Single-Axis Fluxgate Magnetometer Product real photo:
