Edmund DOF 5-15 Depth of Field Target,Optical imaging test phantom

Mode:DOF-5-15

Type:QA-Phantom

Contact:   ken@hkmedqc.com

The DOF 5-15 depth of field test plate enables the standardization of measurement of optical tolerances. Otherwise, in most cases, it is based on theoretical calculations. Our extensive optical experience indicates that the depth of field determined through theoretical calculations often leads to perplexing conclusions. This test plate solves this problem and can precisely determine the offset of the target when an unacceptable image is produced. Regarding the acceptable clarity, it should be determined based on the user and the application field. The DOF 5-15 has two scales. For each scale, when viewed at 45 degrees, there are horizontal and vertical lines, with densities of 5 and 15 lines per millimeter. Instructions for use are included.

Edmund DOF 5-15 Depth of Field Target is specifically designed for machine vision, cameras, and optical imaging systems, and is used for actual depth of field measurements to avoid errors caused by pure theoretical calculations.

When observed at a 45-degree angle, this target provides two sets of resolution scales: 5 lp/mm and 15 lp/mm, both horizontal and vertical line pairs, helping users determine the actual performance of depth of field based on the actual image quality.

Edmund DOF 5-15 Depth of Field Target,Optical imaging test phantom

Main features

1) Measuring the depth of the imaging system
2) The values can be directly read without calculation
✅ Actual depth measurement, no need for complex formula calculations
✅ Horizontal and vertical resolution patterns are 5 lp/mm and 15 lp/mm respectively
✅ Maximum measurable depth: 50 mm
✅ Utilizing a solid aluminum mechanical casing, size: 57×34×57 mm
✅ Black background white film substrate
✅ Compliant with RoHS and REACH standards, accompanied by an operation manual
 
Edmund DOF 5-15 Depth of Field Target,Optical imaging test phantom
 
Edmund DOF 5-15 Depth of Field Target,Optical imaging test phantom
 
Edmund DOF 5-15 Depth of Field Target,Optical imaging test phantom
 

Application fields

Performance verification of machine vision cameras, depth-of-field testing of optical lenses, acceptance testing of imaging systems, laboratory calibration of light sources, and quality inspection during research and development.
 

Specification parameters

 
- Model: DOF 5–15, Item Number 54-440
- Resolution scale: 5 lp/mm, 15 lp/mm (horizontal and vertical)
- Maximum depth: 50 mm
- Structural material: Aluminum
- Total size: Height 57 mm × Width 34 mm × Depth 57 mm
- Backplate material: Black and white backlit film
- Compliance standards: RoHS 2015, REACH 240
- Accessories: Comes with user manual



 SAG: DOF 5-15,Depth of Field Target 5-15,Edmund DOF5-15,54-440,depth of field test target,optical DOF test chart,imaging system depth-of-field measurement,5lp/mm 15lp/mm resolution target