WEK-CTSIM Laser Alignment Phantom
Mode：WEK-CTSIM
Type:QA-Phantom
Contact： ken@hkmedqc.com
WEK_CTSIM_Laser_Alignment_Phantom_EN
Product Introduction
WEK-CTSIM Verification Phantom, WEK-CTSIM Laser Calibration Phantom, Laser QA Phantom, Calibration Phantom, Precision-Graduated Calibration Phantom: Enables intuitive and comprehensive daily QA/QC for laser alignment systems.The WEK-CTSIM Verification Phantom (WEK-CTSIM Laser Calibration Phantom) is designed for the alignment and calibration of both fixed and movable positioning devices. It is utilized during the initial setup and as part of ongoing Quality Assurance (QA) programs for these systems.
Once the phantom is positioned, the alignment accuracy of external lasers, the CT unit's internal lasers, and the movement of the patient table can be tested.
WEK-CTSIM Laser Alignment Phantom Specifications
· Phantom Dimensions: 620mm × 200mm × 200mm· Phantom Weight: 4 kg
· Phantom Material: PVC
The WEK-CTSIM Calibration Phantom and WEK-CTSIM Laser Alignment Phantom are designed for aligning both movable and fixed laser lines on CT systems. The design facilitates the adjustment of apertures, bubble levels, and overall equipment leveling. Installation of the calibration phantom is quick and simple. Once the phantom is installed, it allows for the verification of the accuracy of external Gammex lasers, as well as the assessment of the accuracy of the CT system's internal lasers and the precision of the patient couch movement.
SAG: WEK-CTSIM Laser Alignment Phantom,WEK-CTSIM,Laser Alignment Phantom,Laser QA Phantom,WEK-CTSIM Verification Phantom,Laser Correction Phantom